Intake Forms for Appraisal Services: What Real Estate and Personal Property Appraisers Need to Capture Before the Inspection
Last month I had an appraiser call me about a problem that could have been avoided with a two-page intake form. He had completed a full appraisal on a waterfront property in Monmouth County — site inspection, comparable sales analysis, adjustment grid, the entire URAR — only to learn after submission that the lender needed a date-of-death retrospective valuation for an estate settlement, not a current market value for a refinance. The intended use was wrong. The effective date was wrong. The scope of work was wrong. He had to start from scratch, eat the cost of the first report, and explain to the executor why the turnaround was now three weeks instead of one.
That scenario plays out in appraisal offices every week, and it is almost always an intake failure. The appraiser did not ask the right questions before accepting the assignment. The client did not volunteer the information because they did not know it mattered. And nobody documented the answers in a way that would have caught the disconnect before twenty hours of work product went into the wrong report.
Appraisal intake is not a formality. It is the process that determines whether the assignment you accept is the assignment the client actually needs, whether the scope of work matches the intended use, whether the fee is appropriate for the complexity, and whether you can even complete the work within USPAP requirements. A structured intake form is not overhead — it is the single most effective tool an appraiser has for preventing wasted work, managing client expectations, and documenting compliance with the Competency Rule and the Scope of Work Rule before the first site visit.
Here is what a comprehensive appraisal intake form should capture, whether you are a solo residential appraiser handling FHA assignments, a commercial MAI running a multi-office practice, or a personal property appraiser valuing estate jewelry and fine art.
Property identification and legal description: getting the subject right
It sounds elementary, but misidentifying the subject property is more common than any appraiser wants to admit. A street address is not sufficient identification for an appraisal assignment. Your intake form needs to capture enough information to confirm that you, the client, and any intended user are all talking about the same piece of real estate:
- Full street address — including unit or suite number for condominiums, cooperatives, and multi-tenant commercial buildings. "123 Main Street" is ambiguous when the building has twelve condo units and the client wants a single unit appraised.
- County and municipality — critical for properties near jurisdictional boundaries. A property in West Orange, New Jersey has a different tax rate, different zoning ordinances, and different comparable sale pool than one in South Orange two miles away.
- Tax parcel identification number — the block-and-lot number (or APN in western states) that ties the property to the assessor's records. This is the definitive identifier when street addresses are ambiguous, when a property has been subdivided, or when the legal description references a lot in a filed subdivision plat.
- Legal description — metes and bounds, lot-and-block, or government survey. For complex parcels — irregularly shaped lots, properties with easements that affect usable area, waterfront properties where the boundary may be the mean high-water line — the legal description determines what you are actually valuing.
- Property type — single-family residential, condominium, cooperative, 2-4 unit residential, vacant land, commercial (office, retail, industrial, mixed-use), agricultural, special-purpose (church, school, gas station, car wash). The property type drives report form selection, comparable sale criteria, and whether you need additional competency in a specialized property category.
- Current owner of record — cross-referenced against the client's representation. When the client is not the owner — an attorney handling an estate, a lender ordering a refinance appraisal, an AMC relaying an order — documenting both the client and the current owner prevents downstream confusion about who owns the property being appraised.
I keep a separate field on my intake form for "property identification notes" where I record anything unusual about identifying the subject. A property that spans two tax lots. A recently subdivided parcel where the new lot numbers have not yet propagated to the MLS. A condo unit where the legal description references a percentage interest in common elements. These details matter at every stage of the appraisal, and capturing them at intake means you do not discover them for the first time when you are sitting in front of the assessor's records.
Client and intended use documentation: the questions that shape the entire assignment
USPAP requires every appraisal report to identify the client, the intended use, and the intended users. These are not boilerplate disclosures — they determine the type of value, the effective date, the scope of work, and the report format. Your intake form must capture them explicitly and early:
- Client identity — the person or entity engaging the appraiser. This may be different from the property owner, the borrower, the attorney, or the AMC transmitting the order. In a lending assignment, the client is the lender, not the borrower — even though the borrower pays the fee. In an estate assignment, the client may be the executor, the estate attorney, or the trustee. Getting this wrong creates confidentiality problems downstream.
- Intended use — what the client will use the appraisal for. This is the single most consequential question on the intake form because it drives almost everything else:
- Mortgage lending — purchase, refinance, HELOC, construction loan. Each has different lender requirements, and FHA/VA/USDA loans have additional property condition requirements.
- Estate settlement / probate — requires date-of-death valuation (retrospective), often needs both date-of-death and current market value, and the IRS may be an intended user.
- Divorce / equitable distribution — requires current market value, may need to address both parties' perspectives on property condition and improvements, and the court is typically an intended user.
- Tax appeal / assessment review — retrospective valuation as of the assessment date, comparable sales limited to the assessment period, and the tax board or court is an intended user.
- Insurance — replacement cost valuation rather than market value, different report format, different comparable data requirements.
- Relocation — corporate relocation appraisals have their own set of standards (ERC/Worldwide ERC) layered on top of USPAP.
- Listing assistance — restricted appraisal report or consultation, not a full appraisal, with different scope and fee implications.
- Litigation support — eminent domain, construction defect, environmental contamination, partnership dissolution. Each litigation context has specific evidentiary requirements and the appraiser should expect to be deposed or to testify.
- PMI removal — specific lender requirements for demonstrating the loan-to-value ratio has dropped below the PMI threshold.
- Bankruptcy — typically needs current market value, trustee or bankruptcy court as intended user, sometimes requires liquidation value rather than market value.
- Intended users — beyond the client. In lending work, the lender and any subsequent purchaser of the loan in the secondary market are intended users. In estate work, the IRS, the probate court, and co-beneficiaries may all be intended users. Identifying them at intake determines who has a right to rely on the appraisal and influences the scope of work.
- Type of value — market value is the default, but the intended use may require fair value (accounting standards), liquidation value (bankruptcy or foreclosure), insurable value (insurance placement), investment value (specific to a particular investor's criteria), or use value (assessments in some jurisdictions).
An appraiser I mentor told me about accepting an order through an AMC for what he thought was a standard refinance. He completed a current-date market value appraisal. The borrower then contested his value with the lender, and when the dust settled, it turned out the lender actually needed a retrospective value as of six months prior for a delayed-financing transaction. The AMC order form did not specify the effective date, and the appraiser did not ask. That is an intake failure, and a single checkbox on a well-designed intake form would have caught it.
Appraisal type selection: matching scope to purpose
Not every assignment requires a full interior-and-exterior inspection with a complete URAR. The intake form should present the available appraisal types so the appraiser and client agree on scope before work begins:
- Full appraisal (1004/URAR) — complete interior and exterior inspection, full development and reporting. This is the standard for most purchase and refinance transactions and requires physical access to the property.
- Exterior-only / drive-by (2055) — exterior inspection only, no interior access. Used for HELOCs, some refinances, and situations where the borrower does not occupy the property. The appraiser views the exterior and relies on MLS data, public records, and prior listings for interior details.
- Desktop appraisal — no physical inspection by the appraiser. Analysis based on MLS data, public records, prior appraisals, and possibly property data collection by a third party. GSE-approved for certain transactions; USPAP compliant when the scope of work is appropriate for the intended use.
- Restricted appraisal report — full appraisal development but abbreviated reporting. The report is restricted to the client and specified intended users only. Lower fee, faster turnaround, but cannot be shared beyond the identified users without a new assignment.
- Appraisal review — the appraiser reviews another appraiser's work product. Field review (with inspection) or desk review (without). Common in lending quality control, litigation (where each side's appraiser reviews the other's report), and AMC oversight.
- Appraisal consultation — the appraiser provides analysis, recommendations, or opinions that do not constitute an appraisal. Listing price opinions, feasibility studies, highest-and-best-use analyses that are not part of a value conclusion. Different scope, different USPAP requirements, different fee.
- Evaluation / BPO — for transactions exempt from appraisal requirements under the de minimis threshold (currently $400,000 for most transactions). Not an appraisal under USPAP, but many appraisers perform these as a service line. Different compliance framework, different E&O insurance considerations.
Documenting the appraisal type at intake is not just about scope — it is about fee. A desktop appraisal at $250 is a fundamentally different engagement than a full interior inspection at $600, and that difference needs to be clear before you accept the order. When I receive an order through an AMC that says "appraisal" without specifying the type, I call back before accepting. The type determines the fee, the turnaround, the inspection requirements, and the report form. Leaving it ambiguous is asking for a dispute.
Property access and scheduling: the logistics that make or break turnaround
An appraisal is worthless if you cannot get into the property. The intake form should capture everything needed to schedule and complete the inspection without multiple rounds of phone calls:
- Occupancy status — owner-occupied, tenant-occupied, vacant, under construction, or being renovated. Tenant-occupied properties require coordination with both the owner and the tenant. Vacant properties may have lockbox access, may require a key from a property manager, or may have security systems that need to be deactivated.
- Access contact — name, phone, email of the person who can provide access. This is often not the client. For a lending appraisal, the borrower provides access. For an estate, the executor or a real estate agent may have keys. For a commercial property, the building manager or property management company controls access.
- Access restrictions — gated community requiring a gate code, doorman building requiring advance notice, agricultural property with livestock (do not leave gates open), commercial property with restricted hours or security clearance, property with aggressive dogs.
- Preferred inspection window — dates and times the property is available. Some clients want to be present; some do not. Tenant-occupied properties may have lease provisions requiring notice before entry. Commercial properties may only be accessible during business hours.
- Travel considerations — rural properties that add significant drive time, island properties requiring ferry access, properties accessible only by private road with seasonal conditions. These affect both fee and turnaround.
I learned this lesson early in my career when I accepted a rush order for a property in the Pine Barrens of New Jersey. The address existed, the property existed, but the access road was an unimproved sand track that my sedan could not navigate. I lost half a day, had to rent an SUV, and ended up completing the inspection a week later than promised. Now my intake form asks about road conditions for any property outside an established neighborhood. It takes five seconds to ask and can save five hours.
Scope of work determination: USPAP's central requirement
USPAP's Scope of Work Rule requires the appraiser to determine and perform the scope of work necessary to produce credible assignment results, given the intended use. The intake form is where that determination starts:
- Extraordinary assumptions — does the assignment require any assumptions that, if found to be false, could change the appraiser's opinions or conclusions? A common example: appraising a property "as if" a proposed renovation has been completed, or "as if" a zoning variance has been granted. These must be identified at intake because they change both the analysis and the report disclosures.
- Hypothetical conditions — conditions that are contrary to known facts but are used for analysis purposes. Appraising a property "as if vacant" when it is currently improved. Appraising an assemblage of parcels "as if merged" when they are legally separate. These are USPAP requirements that must be agreed upon before work begins.
- Effective date — current date (most lending and transaction work), retrospective date (estate, tax appeal, litigation, some insurance claims), or prospective date (proposed construction, as-completed valuations). The effective date determines which comparable sales are relevant and may require research into market conditions as of a prior date.
- Supplementary standards — does the assignment require compliance with standards beyond USPAP? FHA Handbook 4000.1 for FHA loans, VA pamphlet requirements for VA loans, FIRREA and the Interagency Appraisal and Evaluation Guidelines for federally related transactions, Yellow Book (UASFLA) for federal land acquisitions. Each adds requirements that affect scope, reporting, and turnaround.
- Prior services — has the appraiser appraised this property within the prior three years? USPAP requires disclosure of prior services, and some clients or intended users have policies that prohibit reuse of an appraiser who has recently appraised the same property.
Recent improvements and renovation documentation
The condition and quality of improvements directly affect value, and an intake form that does not ask about recent renovations is an intake form that leads to surprises at the inspection:
- Renovations completed within the past five years — kitchen remodel, bathroom renovation, roof replacement, HVAC system, windows, siding, addition. For each renovation: approximate date completed, approximate cost, whether permits were pulled and inspections passed, whether the work was done by a licensed contractor or by the owner.
- Renovations in progress — partially completed work changes the appraisal from an "as-is" to either a subject-to-completion or a hypothetical condition analysis. An intake form that asks this question up front prevents the appraiser from arriving at a property with the kitchen gutted and no drywall.
- Planned renovations — if the client wants an "as-completed" value for a proposed renovation, the intake needs to capture the scope of work, the budget, the contractor (if any), and the expected completion date. The appraiser will need plans, specifications, and a cost breakdown to develop an as-completed value.
- Unpermitted work — additions built without permits, finished basements not reflected in public records, converted garages. This is sensitive — the client may not volunteer it — but it directly affects the appraisal because unpermitted improvements cannot be valued at the same level as permitted work, and some lenders will not lend on properties with known unpermitted improvements.
- Environmental issues — known asbestos, lead paint, underground storage tanks, flood zone designation, wetlands on the property, Superfund proximity. Each of these may require additional expertise, affect value, trigger lender requirements, or necessitate extraordinary assumptions in the report.
Comparable sales and market data requests
While the appraiser selects comparable sales independently, the intake form should capture client-provided information that helps focus the search and identifies potential issues:
- Purchase price and date — if the property is under contract, the purchase price and contract date are required for lending appraisals. The appraiser must analyze the contract and determine whether the price is consistent with market evidence.
- Prior sales within three years — USPAP and lending standards require disclosure of prior sales of the subject. If the property sold eighteen months ago for $350,000 and is now under contract for $525,000, that is a 50% increase that the appraiser must explain. Better to know at intake than to discover it in the public records.
- Comparable sales the client wants considered — lenders, attorneys, and homeowners may have specific sales they believe are relevant. The appraiser is not obligated to use them, but knowing about them at intake allows the appraiser to evaluate them early and explain in the report why they were or were not used.
- Current or prior listing history — is the property currently listed for sale? Has it been listed and expired or withdrawn in the past twelve months? The listing history is required in most appraisal reports and can reveal market exposure, price adjustments, and days on market that inform the value conclusion.
- Concessions or seller contributions — seller-paid closing costs, repair credits, personal property included in the sale price. These must be identified and the purchase price adjusted accordingly in lending appraisals.
USPAP compliance and ethics documentation
The intake form is the first compliance checkpoint in the appraisal process. Documenting USPAP considerations at intake — rather than after the fact — protects the appraiser in any subsequent review, complaint, or disciplinary proceeding:
- Competency Rule assessment — does the appraiser have the knowledge and experience necessary to complete this assignment competently? An appraiser who has done five hundred suburban residential appraisals may not be competent to appraise a horse farm, a marina, or a mixed-use commercial building. The intake form should include a competency self-assessment: property type experience, geographic area familiarity, and whether the appraiser needs to take steps to satisfy the Competency Rule (association with an experienced appraiser, additional research, specialized education) before accepting.
- Independence and objectivity — does the appraiser have any interest in the property or any relationship with any party to the transaction? This includes financial interest, family relationship, business association, or any other factor that could compromise objectivity. Lending regulations (FIRREA, Dodd-Frank) have their own independence requirements that go beyond USPAP.
- Assignment conditions — is the client imposing any conditions on the assignment that would violate USPAP? A request to "hit a number," a directive to use specific comparable sales to the exclusion of better ones, a fee contingent on the value conclusion — all of these are USPAP violations that must be identified and declined at intake, not after the report is half-written.
- Confidentiality — identifying who can receive the appraisal report. The Confidentiality section of the USPAP Ethics Rule prohibits disclosure of confidential information or assignment results to anyone other than the client, persons specifically authorized by the client, state appraiser regulatory agencies, third parties authorized by due process of law, and a duly authorized professional peer review committee. The intake form should document the client's authorized recipients.
Engagement letter and fee structure
The intake form and the engagement letter are complementary documents. The intake captures the assignment parameters; the engagement letter memorializes the business terms. Many appraisers combine them into a single document — intake questions on the front, engagement terms on the back — and that approach has the advantage of ensuring every assignment has both:
- Fee — stated as a flat amount, not a range. "The fee for this assignment is $550" leaves no room for dispute. "$400-600 depending on complexity" invites the client to expect $400 while the appraiser delivers $600 worth of work.
- Payment terms — when the fee is due (at inspection, upon delivery, net 30), accepted payment methods, and late payment policy. For private-party clients (estate, divorce, homeowner-ordered appraisals), many appraisers require payment at the time of inspection. For AMC and lender clients, payment terms are typically dictated by the AMC's schedule.
- Cancellation policy — what happens if the client cancels after the inspection but before report delivery? After the appraiser has spent two hours at the property and another four hours researching comparable sales, the work has value even if the report is never completed. A cancellation fee — typically 50% of the full fee — documented at intake protects the appraiser's time.
- Scope changes — how fee adjustments are handled if the assignment scope changes after engagement. An assignment that starts as a single-family residential appraisal but turns out to involve a detached rental unit, a non-conforming use, or an adjacent vacant lot that the client wants included changes the scope and should change the fee.
- Revision policy — how many rounds of revision or response to lender conditions are included in the base fee, and the hourly rate for additional work beyond the included revisions. In lending work, reconsideration of value requests and lender condition clearing can consume as much time as the original appraisal.
Turnaround time and rush fee policies
Turnaround expectations are the second-most-common source of appraiser-client disputes, after fee. The intake form should set clear, documented expectations:
- Standard turnaround — the normal delivery timeframe for this type of assignment in the appraiser's practice. For residential work, that is typically five to ten business days from the date of the inspection. For complex commercial assignments, it may be three to six weeks.
- Rush turnaround — an accelerated delivery for time-sensitive assignments. Rush fees are standard in the appraisal profession — typically 50% to 100% above the standard fee — and should be documented on the intake form so the client makes an informed decision.
- Turnaround triggers — the turnaround clock starts when the inspection is completed, not when the order is placed. If property access delays the inspection by a week, that is a week added to the delivery date. If the client provides supplementary information (rent rolls, operating statements, renovation plans) late, that extends the timeline. Document the triggers on the intake form so there is no dispute about whether the appraiser is "late."
- Closing date pressure — in lending work, the real estate closing date often drives urgency. Capturing the closing date on the intake form allows the appraiser to assess whether the timeline is achievable and to set appropriate expectations if it is not. Delivering a rush report the day before closing is possible; delivering a quality report the day after receiving the order is not.
AMC versus direct client intake differences
If you work with Appraisal Management Companies, your intake process has two tracks — and your form needs to accommodate both. AMC orders and direct-client orders involve the same appraisal work, but the intake mechanics are fundamentally different:
- AMC orders — the AMC is the client for USPAP purposes (in most states), but the lender is the intended user. The AMC transmits the order electronically, often through a portal or integration platform. The order includes a property address, a borrower name, a loan type, and usually very little else. The appraiser must extract the missing details — property type, intended use specifics, effective date, supplementary standards — from the order context or by contacting the AMC. Your intake form for AMC orders should have fields for AMC name, AMC order number, lender name, loan number, loan type, and a section for information that was missing from the order and had to be obtained through follow-up.
- Direct lender orders — some lenders maintain approved appraiser panels and order directly without an AMC intermediary. The intake is similar to an AMC order but without the middleman. Communication is typically faster, fees are usually higher, and there is less ambiguity about assignment conditions because you are dealing with the actual client.
- Private-party orders — estate attorneys, divorce attorneys, homeowners, investors, and other non-lending clients contact the appraiser directly. These orders require the most thorough intake because there is no AMC or lender providing a structured order form. The private-party client may not know what type of appraisal they need, what effective date is appropriate, or what the appraisal report will look like. The intake process is partly educational — explaining options and guiding the client to the right assignment parameters.
- Fee documentation differences — AMC fees are typically preset and non-negotiable (the appraiser accepts or declines the order at the offered fee). Direct-client fees are negotiated and should be documented on the intake form. Private-party clients often have no frame of reference for appraisal fees and may experience sticker shock if the fee is not discussed and documented before work begins.
I have a separate intake form section for AMC-specific fields that I leave blank for direct clients. The AMC order number, portal login, and lender condition requirements are irrelevant for a divorce attorney who needs a retrospective value. Having both tracks on one form — with the AMC section clearly labeled as "complete only for AMC orders" — keeps everything in one document without cluttering the intake for private clients.
Estate and probate appraisal requirements
Estate appraisals are among the most technically demanding residential assignments, and they require intake information that no standard lending form captures:
- Date of death — this is the effective date for the appraisal, and it may be months or years in the past. A date-of-death appraisal completed two years after the decedent passed requires research into market conditions, comparable sales, and property condition as of the date of death, not as of today. The intake must capture the exact date of death and flag the retrospective nature of the assignment.
- Alternate valuation date — for federal estate tax purposes (IRS Form 706), the executor can elect an alternate valuation date six months after the date of death if the estate's value has declined. If the executor wants both dates appraised, the intake needs to capture that requirement and the fee needs to reflect two effective dates.
- IRS intended user status — if the appraisal will be submitted with an estate tax return, the IRS is an intended user and the report must satisfy IRS requirements for qualified appraisals. The intake should capture whether a Form 706 is being filed, whether the estate exceeds the federal exemption threshold, and whether state estate or inheritance taxes apply (New Jersey, for example, has an inheritance tax with different exemptions based on the beneficiary's relationship to the decedent).
- Property condition as of the date of death — the property may have changed since the decedent passed. Renovations by heirs, deferred maintenance, storm damage, or simply the passage of time can alter the property's condition. The intake should capture what the client knows about the property's condition at the date of death versus its current condition. Photographs taken near the date of death are invaluable and should be requested.
- Multiple properties — estates often include more than one property. A primary residence, a vacation home, rental properties, undeveloped land. The intake should capture all properties requiring appraisal and whether the client wants separate reports or a single consolidated engagement.
- Personal property included in the estate — some estate appraisals also require valuation of personal property (jewelry, art, antiques, vehicles, collections). If the appraiser does not perform personal property appraisals, this is the point at which to refer the client to a qualified personal property appraiser and document that referral.
I handled an estate appraisal last year where the decedent had passed eighteen months earlier, and the executor had since renovated the kitchen and both bathrooms. The property's current condition was materially different from its condition at the date of death. Without intake questions that specifically asked about changes since the date of death, I would have arrived at the inspection, seen a renovated kitchen, and had no basis for determining what the kitchen looked like eighteen months prior. The executor was able to provide before-renovation photographs because my intake form asked for them.
Divorce and equitable distribution appraisal considerations
Divorce appraisals sit at the intersection of real estate valuation and family law, and they carry complexities that lending and estate appraisals do not:
- Court requirements — many family courts have specific requirements for appraisal reports used in equitable distribution. Some require both parties to use the same appraiser. Some require each party to retain their own appraiser. Some have standing orders specifying report content, effective date, and submission format. The intake form should capture the court, the case number, and any court-specific requirements.
- Which party is the client — this determines confidentiality. If one spouse engages the appraiser, the report is confidential to that client under USPAP, and the other spouse is not an intended user unless specifically identified. If the court orders a joint appraisal, both parties (or their attorneys) may be co-clients. Documenting who is the client and who are the intended users at intake prevents confidentiality disputes later.
- Effective date disputes — in equitable distribution, the valuation date may be the date of complaint, the date of separation, or the date closest to trial. The parties may disagree about which date should be used. The intake form should capture what the client's attorney has specified as the effective date and whether it is contested.
- Property condition disputes — one party may claim that the other has deferred maintenance, removed fixtures, or damaged the property. The other party may claim that they improved the property with marital funds. The intake form should capture both parties' representations about property condition if the appraiser will be inspecting a property where condition is disputed.
- Access coordination — in contentious divorces, the party occupying the property may resist or delay access for the appraiser. The intake should identify who occupies the property, whether a court order compels access, and the contact information for both parties' attorneys so access can be coordinated through counsel if necessary.
- Expert witness expectations — will the appraiser be expected to testify? In a deposition? At trial? As a fact witness or as an expert? Expert testimony requires additional preparation, carries higher fees, and may require the appraiser to review and rebut the opposing party's appraisal. Documenting testimony expectations at intake allows the appraiser to set the right fee and to prepare the file with the expectation that it will be scrutinized.
I once appraised a property for a divorce where the wife's attorney told me the husband had removed all the appliances and light fixtures before vacating. The husband's attorney told me the wife had let the landscaping deteriorate and failed to maintain the pool, reducing the property's value by $30,000. Both representations were partially true. My intake form captured both parties' positions, and I noted the condition issues in my report with factual observations rather than attributing blame to either side. That is what a good intake process enables — you go in knowing the contested issues, not discovering them at the inspection.
Commercial property intake: income approach data
Commercial appraisals require an entirely different set of intake data because value is typically driven by income rather than comparable sales. The intake form for a commercial assignment must capture the financial information needed for the income approach:
- Rent roll — current tenant roster with unit numbers, tenant names, lease start and expiration dates, base rent, rent escalations, CAM/NNN pass-throughs, percentage rent provisions (retail), and any rent concessions or free rent periods. A rent roll that shows 95% occupancy with three tenants on month-to-month leases tells a different value story than 95% occupancy with ten-year NNN leases.
- Operating statements — at least three years of historical income and expense statements. Real estate taxes, insurance, management fees, maintenance, utilities, reserves for replacement, legal and accounting fees. The intake form should specify what format the client should provide (QuickBooks export, CPA-prepared statements, owner spreadsheet) and for what time period.
- Lease abstracts — for properties with complex leases (office buildings, shopping centers, industrial parks), the appraiser needs abstracts or copies of all leases. The intake form should identify how many leases are in place and request copies or abstracts as part of the engagement.
- Capital expenditure history — major expenditures (roof replacement, HVAC, elevator modernization, parking lot resurfacing) in the past five years. These affect the property's condition rating and influence the reserve-for-replacement deduction in the income analysis.
- Pending lease negotiations — are any tenants in lease renewal negotiations? Is there a signed LOI with a new tenant for vacant space? Pending leases affect the prospective income analysis and may constitute an extraordinary assumption if the appraiser incorporates them into the valuation.
- Zoning and entitlements — current zoning, any pending variance or rezoning applications, special permits, site plan approvals, and development rights (air rights, transferable development rights). For commercial properties, the highest-and-best-use analysis depends heavily on zoning, and the intake should capture enough detail for the appraiser to research the relevant ordinances before the inspection.
- Environmental reports — Phase I Environmental Site Assessments, Phase II reports, remediation reports, environmental insurance policies. Commercial lenders almost always require a Phase I, and if one exists, the appraiser should review it. The intake form should ask whether environmental reports are available and, if so, request copies.
Personal property appraisal intake: jewelry, art, antiques, and collectibles
Personal property appraisal is a distinct discipline from real estate appraisal, governed by USPAP but requiring different expertise, different market data, and different intake information. If your practice includes personal property valuations — or if you accept estate engagements that bundle real and personal property — your intake form needs a dedicated section:
- Item inventory — a detailed list of items to be appraised, with descriptions, approximate dimensions, and any known provenance. "Grandmother's jewelry" is not an appraisable description. "18K yellow gold bracelet with approximately 2 carats of round brilliant diamonds, purchased at Tiffany & Co. circa 1985" is a starting point.
- Intended use for personal property — this drives the type of value. Insurance replacement value is the cost to replace the item with one of similar quality in the appropriate retail market. Fair market value (estate tax, donation) is what a willing buyer would pay a willing seller with both having reasonable knowledge of relevant facts. Liquidation value (divorce, bankruptcy) is what the item would bring at auction or through a dealer. The same diamond ring might be worth $15,000 for insurance replacement, $8,000 at fair market value, and $4,500 at liquidation. The intake must capture the intended use so the appraiser applies the right value standard.
- Prior appraisals — has the item been appraised before? When? By whom? At what value? Prior appraisals provide a baseline but can be outdated — especially for items like colored gemstones and art, where markets shift significantly. A Burmese ruby appraised at $20,000 in 2010 may be worth $45,000 today based on market demand for untreated stones.
- Documentation — GIA or AGS certificates for diamonds, certificates of authenticity for art, provenance documentation for antiques, receipts for recent purchases, auction records for items purchased at auction. The intake form should specify what documentation the client should bring to the appraisal appointment.
- Location of items — are items in a home, a safe deposit box, a storage facility, an attorney's office, or a trust company vault? For estate appraisals, are items still in the decedent's residence or have they been distributed to beneficiaries? Access logistics for personal property can be more complex than for real estate — a safe deposit box requires the keyholder, a bank officer, and possibly a court order if the estate is in probate.
- Photography permissions — personal property appraisals require detailed photography. For high-value items (fine art, significant jewelry, rare collectibles), the appraiser may need to arrange professional photography. The intake should confirm that photography is permitted and whether there are any restrictions (some clients with high-value art collections have security concerns about photographic documentation).
- Specialty categories — wine collections, firearms, musical instruments, vintage automobiles, numismatic collections, and memorabilia each require specialized knowledge and market access. The intake form should identify the category of personal property so the appraiser can assess competency under USPAP before accepting the engagement.
Putting it together: the intake form as a practice management tool
A well-designed appraisal intake form does more than capture data for a single assignment. It serves as the backbone of practice management:
- Fee consistency — when every assignment starts with the same intake process and the same fee schedule documented on the form, pricing becomes consistent and defensible. When an AMC asks why your fee is $650 for a property they think should be $400, you can point to the intake documentation: rural location with 45-minute drive time, 3,800 square feet with a detached guest house, complex site with flood zone encroachment, and an as-completed renovation value requiring plans review. The fee is not arbitrary — it is a function of the scope documented at intake.
- Workload management — intake forms in a standardized format allow an office manager or assistant to triage orders, estimate completion time, and schedule inspections without the appraiser reviewing every detail personally. The form captures enough information for a knowledgeable staff member to determine whether an order is routine or complex.
- Compliance documentation — in the event of a state board complaint, a USPAP compliance review, or a Fannie Mae CU challenge, the intake form is the first document that demonstrates the appraiser's process. It shows that the scope of work was determined before work began, that the Competency Rule was considered, that assignment conditions were reviewed, and that the client and intended use were identified at the outset. An appraiser without intake documentation is an appraiser who will struggle to demonstrate compliance.
- Client education — the intake process is often the client's first exposure to how appraisal works. A private client who calls asking for "a quick opinion on what my house is worth" does not understand the difference between a full appraisal, a restricted report, and a consultation. Walking through the intake form educates the client about what they are buying, sets expectations for the process and timeline, and demonstrates the appraiser's professionalism and thoroughness.
After twenty years of appraisal practice, I can trace nearly every problem I have had with a client — fee disputes, turnaround complaints, scope misunderstandings, report revision requests — back to something that was not documented at intake. The appraiser who says "I do not need a formal intake process because I remember everything" is the appraiser who will forget that the attorney needed a retrospective date, that the lender needed an FHA inspection, or that the homeowner expected a $400 fee when the assignment warranted $700. A two-page intake form takes five minutes to complete. The problems it prevents can take hours, days, and sometimes lawsuits to resolve.
Professional intake forms for every service business
Fillable PDF intake forms and client questionnaires — ready to download and use today. Built for appraisers, attorneys, healthcare providers, contractors, and professional service firms.
Browse All Forms View Bundles