← All resources

Intake Forms for Auto Body and Collision Repair Shops: From Estimate to Completion

Collision repair is unlike almost any other trade. The customer arrives stressed, possibly injured, dealing with an insurance company they didn’t choose, and handing over a vehicle that may be undriveable. The estimate you write at intake isn’t just a price quote—it’s a legal document, a communication tool, and the foundation for every supplement, authorization, and parts decision that follows. Get the intake wrong and you spend the next three weeks chasing approvals, eating storage fees, and defending yourself against “it wasn’t like that before.”

By Daniel Akselrod · Licensed Attorney · July 15, 2026

Every body shop owner has lived the nightmare. A car comes in after a rear-end collision. You write the estimate, order parts, start teardown, and discover that the quarter panel damage extends into the wheel house and the trunk floor is buckled. Now you need a supplement. The adjuster takes four days to reinspect. The customer calls every morning asking when the car will be ready. The rental authorization runs out before the supplement gets approved. And somewhere in the middle of all this, the customer picks up the finished car and points to a scratch on the front bumper that has absolutely nothing to do with the collision, insisting you put it there.

A well-designed intake form does not eliminate these headaches entirely. Insurance will always be slow and customers will always be anxious. But it compresses the chaos into something manageable by capturing the right information at the right moment, before the car goes into the booth and before anyone forgets what they agreed to.

Vehicle identification at the front counter

The VIN is the backbone of every collision estimate and it deserves more attention than a quick glance at the dashboard plate. In collision work, the VIN determines far more than engine and trim. It tells you the exact paint code, which matters because a 2023 Honda Civic in Rallye Red from the East Liberty, Ohio plant may use a slightly different formula than one from the Greensburg, Indiana plant. It identifies factory-installed ADAS components—blind spot sensors, parking cameras, forward collision warning radar—that will need recalibration after structural repair. And it pulls recall status, which is critical because you do not want to return a vehicle to a customer with an open safety recall that you could have caught at intake.

Beyond the VIN, your intake should capture year, make, model, color code, current mileage, and license plate number. Mileage matters more than most shops realize. If the customer disputes the repair timeline later and claims the car sat idle in your lot for weeks, the mileage at drop-off and pick-up tells the real story. Color code deserves its own field because “black” is not a color code—there are a dozen shades of black across manufacturers, and your painter needs the specific code from the door jamb sticker to mix an accurate match.

Damage assessment and the estimate that follows

Here is where collision intake diverges sharply from general auto repair. A mechanic diagnosing a check engine light can take the car for a drive and run scans. A collision estimator is often working from visual inspection alone, writing a preliminary estimate on damage they can see while knowing full well that hidden damage may double the repair cost once teardown begins.

Your intake form should capture the location of visible damage using a vehicle diagram—front, rear, driver side, passenger side, roof, undercarriage—with severity ratings for each affected panel. This is not a substitute for photos, and every shop should be photographing every vehicle at intake from multiple angles with timestamps. But the written damage assessment on the intake form serves a different purpose than the photos. It is the estimator’s professional judgment at the time of check-in, and it becomes the baseline against which supplements are measured. When you submit a supplement to the insurance company showing that the inner fender apron is bent, they will look at your original estimate and ask why it was not on there. Your answer needs to be that it was not visible until teardown, and your intake documentation needs to support that answer.

Severity ratings matter, too. There is a significant difference between “minor dent, paintless dent repair candidate” and “panel buckled, replace.” Documenting severity at intake sets expectations with both the customer and the insurance company. It also helps your production manager plan workflow—a car with cosmetic-only damage goes on a completely different timeline than one needing structural pulls on the frame rack.

Insurance claim information and the adjuster relationship

In collision repair, the person paying the bill is usually not the person standing at your counter. The customer owns the car, but the insurance company controls the purse strings, and your intake form needs to capture the entire chain. That means the insurance carrier name, policy number, claim number, the assigned adjuster’s name and direct phone number, whether the claim has been filed or the customer is planning to file, and whether the customer is the policyholder or a claimant on someone else’s policy.

Rental car authorization is another field that belongs on the intake form, not buried in a phone call two days later. Does the customer have rental coverage? What is the daily limit? Has the insurance company already set up a rental reservation? If the customer is driving a rental while their car is in your shop, every day of delay costs someone money—and when the rental authorization runs out before the repair is finished, the finger-pointing starts. Capturing the rental details at intake lets you manage the timeline against a known constraint instead of discovering it when the rental company calls demanding the car back.

Some shops also capture whether the customer has spoken with the adjuster yet, whether an independent appraiser has been assigned, and whether the vehicle has already been inspected by the insurance company or needs a first inspection at the shop. Each of these details changes your workflow. A car that has already been inspected and has an approved estimate can go straight into production. A car waiting for its first adjuster visit might sit in your lot for a week, and your intake form should document when it arrived so you can bill storage if necessary.

Pre-existing damage and the conversation nobody wants to have

This is the single most important liability section on a collision repair intake form, and it is the one that separates professional shops from the ones that end up in small claims court. Every vehicle that enters your facility already has wear and tear, prior damage, faded paint, stone chips, parking lot dings, and scratches that have nothing to do with the collision you are repairing. If you do not document all of it at intake, you own it at delivery.

The pre-existing damage walk-around should be methodical. Start at the front bumper and work clockwise around the vehicle, noting every imperfection that is not related to the current claim. Interior damage matters too—stained seats, cracked dashboard, cigarette burns, missing trim pieces. Photograph everything and reference the photos on the intake form by number or timestamp. The customer should see this documentation and acknowledge it. On the intake form, which is your internal document, the estimator records the findings. On the client questionnaire, which is the customer-facing document, the customer signs an acknowledgment that the pre-existing conditions were noted and discussed.

This dual-document approach is not overcautious. It is standard risk management. When a customer calls three days after pick-up and says “there’s a scratch on my door that was not there before,” you pull the intake form, find the note that says “6-inch scratch on driver door, approximately 18 inches from bottom edge, documented at intake,” cross-reference it with the timestamped photo, and the conversation is over. Without that documentation, you are either repainting a door at your expense or losing a customer. Neither outcome is good for business. You can explore how other trades handle this same documentation challenge across different industries in our full catalog of profession-specific intake forms.

Parts preferences and why they matter more in collision work

In mechanical repair, parts preference is mostly about budget. In collision repair, it is about budget, fit, finish, warranty, and sometimes the law. OEM parts come from the vehicle manufacturer and are guaranteed to fit and match the original finish. Aftermarket parts are made by third-party manufacturers and can range from excellent to terrible depending on the supplier. Recycled parts come from salvage yards and are genuine OEM components from donor vehicles, which means they fit perfectly but may have cosmetic wear.

Your intake form needs to capture the customer’s preference, but it also needs to note whether the insurance company has specified a parts type. Many insurance policies include language allowing the use of aftermarket or recycled parts, and some state laws regulate when and how insurers can mandate non-OEM parts. If the customer wants OEM and the insurance company is only paying for aftermarket, that gap needs to be identified at intake, not after the parts are ordered. The customer can choose to pay the difference, accept the aftermarket parts, or negotiate with their adjuster—but they need to make that decision before you have a hood sitting on your receiving dock that they do not want on their car.

Customer authorization levels and supplement approval

Collision repair almost always involves supplements—additional damage discovered during teardown that was not visible at initial inspection. The authorization framework you set at intake determines how smoothly the supplement process goes. Your intake form should capture whether the customer authorizes the shop to submit supplements directly to the insurance company, whether they want to be notified before any additional work begins, and what their out-of-pocket limit is beyond the insurance payout.

Storage fees are another authorization item that belongs on the intake form. If a car sits in your lot waiting for an adjuster inspection, waiting for parts, or waiting because the customer has not approved the repair, you need to know whether you can charge storage and at what rate. Many shops include storage terms on the intake form and have the customer acknowledge them at drop-off, which prevents the ugly conversation six weeks later when a customer has abandoned a total-loss vehicle in your lot and you have no documented right to recover storage costs.

Discovery of additional mechanical damage during collision teardown is another scenario that requires pre-authorization. If you pull a bumper cover and find that the radiator support is bent and the AC condenser is cracked, the customer needs to know, the insurance company needs a supplement, and your shop needs authorization to proceed. The intake form should establish the communication channel—phone, text, email—and the customer’s preferred method for receiving supplement approvals. It should also establish what happens if the customer is unreachable for more than a specified number of business days. Does the car come off the frame rack and go back outside? Does the shop proceed with reasonable repairs up to a pre-authorized limit? These are decisions that are much easier to make at a calm front counter than in the middle of a teardown with a tech waiting for direction.

The intake form as a legal shield

When I say legal shield, I do not mean it as a metaphor. A properly completed collision repair intake form is a contemporaneous business record that documents the condition of the vehicle at the time it entered your possession, the scope of work authorized by the customer, the parts preferences agreed upon, the pre-existing damage that was present before you touched it, and the communication and authorization protocols the customer consented to. In any dispute—small claims, insurance arbitration, state motor vehicle board complaint, or consumer affairs investigation—that intake form is your primary evidence.

The shops that struggle with disputes are almost always the ones that rely on verbal agreements and memory. The shops that win disputes are the ones that can produce a signed, dated intake form that says exactly what was agreed to on the day the car arrived. It is the cheapest insurance policy your body shop can carry, and it costs nothing beyond the three minutes it takes to fill it out properly at the front counter.

If your shop handles both collision work and general mechanical repair, you already know that the intake needs are different for each. Our shop page includes forms designed specifically for collision and auto body work, built to capture the insurance details, damage assessment fields, parts preference sections, and authorization frameworks that generic auto repair forms miss entirely.

Get the Auto Body & Collision Repair intake form and client questionnaire

Our fillable PDF intake form and client questionnaire are designed specifically for collision repair shops. The intake captures VIN and color code, damage location and severity, insurance claim and adjuster details, rental authorization, pre-existing damage documentation, parts preferences, supplement authorization, and storage terms—everything your estimator needs before the car goes into the booth. The client questionnaire handles customer signatures, damage acknowledgments, parts elections, and authorization levels. Both are fillable, printable, and ready to use today.

Browse Auto Body & Collision Forms →

Not ready to buy? Download our free Universal Intake Form — a fillable PDF you can use today, no purchase needed.

Related Forms You Might Need