By Daniel Akselrod · Licensed Attorney · July 2026

Intake Forms for Pest Control Services: Identifying the Problem Before You Load the Truck

A pest control technician who pulls up to a property without knowing what the customer has seen, where they have seen it, or whether there are children crawling on the floors inside is starting the job behind. They are going to spend the first twenty minutes doing discovery work that should have been done at the office — walking the perimeter, asking questions, opening the truck to swap out chemicals they should not have loaded in the first place. That is not service. That is a diagnostic visit the customer did not ask for and will not be happy paying for. The difference between a pest control company that shows up ready to treat and one that shows up ready to figure things out is almost always the intake.

Pest control is not one service. It is dozens of services that happen to share a truck. A German cockroach infestation in a commercial kitchen requires gel bait stations and insect growth regulators applied in cracks and crevices near heat sources. A carpenter ant colony in a residential crawl space requires locating the satellite nests and treating the moisture-damaged wood they are excavating. A bed bug job in a multi-unit apartment building requires heat treatment coordination across adjacent units with tenant notification and furniture preparation. A wildlife exclusion for raccoons in an attic requires trapping, entry point sealing, and attic restoration. None of these jobs use the same chemicals, the same equipment, or the same approach — and in most cases, the technician can know exactly which one they are walking into if someone asks the right questions before the truck leaves the yard.

Pest identification at intake: what the customer has seen

The most important section of a pest control intake form is pest identification, and it is the section most companies handle the worst. The typical phone intake goes something like this: the customer says they have bugs, the dispatcher asks what kind, the customer says they do not know, and the dispatcher books a general service call. That is three missed opportunities to gather information that would have changed the entire visit.

Customers may not know the species, but they know what they saw. They know whether it was small and brown and moved fast across the kitchen counter at night, or large and black and came out of a crack in the bathroom tile, or tiny and reddish-brown and found on the mattress seam after they woke up with bites. They know whether they saw one or fifty. They know whether it had wings. They know whether it was inside a cabinet, along a baseboard, in the garage, or falling from the ceiling. Every one of those details narrows the identification before the technician ever arrives.

Your intake should capture what the customer observed — the size, color, and behavior of the pest as the customer describes it — along with where they saw it, what time of day, and how many. A single large ant on a kitchen counter in June is a very different situation from dozens of small ants trailing along a windowsill in March. The first might be a scout from an outdoor colony. The second is almost certainly an established indoor colony with a trail to a food source. The location matters because pests are habitat-specific. Cockroaches near the dishwasher point to German roaches exploiting the warmth and moisture. Cockroaches in the garage suggest American or Oriental roaches coming in from outside. The treatment plan is completely different, and the intake is where you make that determination.

The form should also ask how long the customer has been noticing the problem. A customer who saw a mouse yesterday has a different situation than a customer who has been hearing scratching in the walls for three months. Duration tells you about population size, nesting, and how entrenched the problem is. A two-week ant problem might respond to a single exterior perimeter treatment. A six-month ant problem means the colony is inside the structure and the exterior treatment alone will not resolve it.

Property details: the structure tells you where to look

Pest behavior is driven by the structure. Termites need wood-to-soil contact. Rodents need entry points the size of a quarter. Moisture pests — silverfish, earwigs, centipedes, certain cockroach species — cluster around plumbing leaks, condensation, and poor drainage. Your intake needs to capture enough about the property that the technician arrives understanding the structure before they see it.

Structure type is the starting point. A single-family home on a slab foundation presents different pest entry pathways than a home with a crawl space or a full basement. Crawl spaces are among the most pest-productive zones in residential construction — they are dark, they are humid, they have exposed soil or vapor barriers that collect condensation, and they provide direct access to the floor joists and subfloor where termites, carpenter ants, and rodents travel into the living space. An intake that captures the presence of a crawl space, its approximate dimensions, and whether it has a vapor barrier and ventilation gives the technician critical information before the first visit.

Attic access matters for the same reasons. Raccoons, squirrels, bats, and roof rats enter through attic vents, ridge caps, and soffit gaps. A technician who knows there is attic access and that the customer is hearing noises overhead at night will bring a headlamp, inspection mirror, and exclusion materials instead of a spray rig. The intake should ask about the attic — whether there is access, whether it is insulated, and whether the customer has noticed droppings, staining, or damage up there.

Exterior landscaping is easy to overlook on an intake form, but it drives pest pressure in residential settings more than almost anything inside the house. Dense mulch beds against the foundation create harborage for ants, termites, and roaches. Overhanging tree branches provide roof access for squirrels and raccoons. Standing water in flower pots, bird baths, and clogged gutters breeds mosquitoes. Firewood stacked against the house is a highway for carpenter ants and termites. A few questions about landscaping at intake tell the technician whether the exterior is part of the problem before they arrive.

Square footage and the number of rooms give the technician a sense of treatment scope and product quantity. A 900-square-foot apartment requires a different volume of product and a different amount of time than a 4,000-square-foot home with a finished basement. Commercial properties need additional detail — total square footage, number of floors, common areas, loading docks, dumpster locations, and whether the building shares walls with adjacent tenants, because shared-wall pest migration is one of the most common sources of reinfestation in commercial pest control.

Pets, children, and chemical sensitivity: the safety gate

This is not an optional section and it is not a nice-to-have. Pets and children are the safety gate of pest control intake, and the information captured here determines which products the technician can use, where they can apply them, and what preparation the customer needs to do before treatment.

Dogs and cats are the obvious concern, but the intake should go further. Fish tanks and aquariums are acutely sensitive to airborne pesticides — pyrethroid-based sprays that are safe for mammals can kill every fish in a tank if the aerosol reaches the water. Reptile terrariums and bird cages present similar risks because reptiles and birds have respiratory systems that are far more sensitive to chemical exposure than mammals. The intake should ask not just whether there are pets, but what kind, how many, and where they are kept in the house. A dog that sleeps in a crate in the bedroom requires different precautions than a cat that roams freely through every room, and both require different precautions than a 200-gallon reef aquarium in the living room.

Children, particularly infants and toddlers, spend more time on the floor and put more objects in their mouths than adults. A treatment plan for a home with a crawling infant is fundamentally different from a treatment plan for a home with no children. The technician needs to know the ages of children in the household so they can select products with the appropriate safety profile, apply them in locations children cannot reach, and advise the customer on re-entry times after treatment. Your intake form should capture this information in a way that makes it impossible to skip — not as a note field at the bottom of the page, but as a required section near the top.

Chemical sensitivity extends beyond pets and children. Customers with asthma, chemical sensitivities, or compromised immune systems need to be identified at intake so the technician can select low-toxicity or botanical alternatives, adjust ventilation recommendations, and extend re-entry wait times. Pregnant customers require additional product restrictions. None of this information should be gathered for the first time on the front porch.

Prior treatment history: what has already been tried

Prior treatment history is one of the most underrated fields on a pest control intake form, and skipping it is one of the most common reasons a treatment fails. What the customer or a previous company has already done to address the problem directly affects what will work now.

Over-the-counter pest control products purchased at hardware stores are the most common prior treatment, and they are often the reason the customer is calling a professional. The problem is not just that the retail products did not work — it is that they may have made the situation harder to resolve. Cockroach foggers, for example, are one of the worst things a customer can use before a professional treatment. Foggers drive cockroaches deeper into wall voids and behind appliances, dispersing a colony that was concentrated in one area into multiple harborage sites throughout the structure. They also deposit a repellent residue on surfaces that can interfere with the gel baits the professional technician plans to use. A technician who knows the customer fogged the kitchen two weeks ago will adjust the treatment plan accordingly — heavier bait placement, longer treatment timeline, expectation setting about the number of follow-up visits.

Previous professional treatments matter just as much. If another company treated for the same pest three months ago and the problem has returned, that tells you something about resistance, harborage, or conducive conditions that were not addressed. Was the previous treatment a general spray or a targeted application? Did they treat the exterior, the interior, or both? Did they inspect the crawl space or attic? Was there a follow-up visit? Your intake should capture the previous provider, the approximate date, the method used if the customer knows it, and whether the problem improved temporarily before returning. That pattern — improvement followed by recurrence — often points to a harborage site or entry point that was never addressed.

Access requirements and scheduling logistics

Pest control access requirements are more complex than most service trades because treatment often involves areas the customer does not use daily. Crawl spaces may have exterior-only access points that require the technician to locate and open a hatch on the side of the building. Attic access may be through a pull-down ladder in a closet that the customer needs to clear before the visit. Garages may need to be opened. Sheds, outbuildings, and detached structures may be padlocked.

For residential properties, the intake should capture gate codes for fenced yards, lockbox codes if the customer will not be home, alarm system instructions, and whether the customer wants to be present during treatment or prefers to leave a key. For commercial properties, the access layer is significantly more complex. Building management may need to authorize the visit. After-hours access for restaurants and food service facilities requires coordination with the manager on duty. Multi-tenant buildings may require advance notice to adjacent units. Loading dock treatments need to be scheduled around delivery windows. Your intake should ask whether the property is commercial or residential and branch the access questions accordingly.

Food handling areas: commercial pest control's highest-stakes zone

Commercial pest control in food service environments — restaurants, commercial kitchens, food processing facilities, grocery stores, school cafeterias — operates under an entirely different regulatory framework than residential pest control. The products, application methods, and documentation requirements near food preparation and storage areas are governed by federal and state food safety regulations, and a pest control company that treats a commercial kitchen the same way it treats a residential kitchen is creating a food safety violation.

Your intake should identify whether the property includes any food handling, preparation, or storage areas. If it does, the form needs to capture the type of food service operation, the hours of operation, when food preparation begins each day, and when the last food contact surfaces are cleaned at night. These details determine when treatment can occur — typically after closing and before the next day's prep — and which products can be used. Gel baits in tamper-resistant stations are generally acceptable near food areas. Broadcast liquid sprays on food contact surfaces are not. The technician needs to know the food handling layout before arriving so they bring the right products and plan the right application method.

The intake should also ask about existing pest control documentation requirements. Many food service operations are subject to third-party audits — AIB, SQF, BRC, or health department inspections — that require detailed pest control service records, bait station maps, and trend reporting. If the customer is subject to audits, the technician needs to know at intake so the service documentation meets the auditor's requirements from the first visit.

Recurring service versus one-time treatment: setting the right expectation

This is where the intake form does its most important expectation-setting work. Many customers call a pest control company expecting a one-time treatment that permanently eliminates the problem. For some pests, that is realistic — a wasp nest removal, a one-time rodent exclusion, or a bed bug heat treatment can resolve the issue in a single visit. But for the most common residential pests — ants, cockroaches, spiders, and general crawling insects — effective control is an ongoing process, not a one-time event.

Your intake should ask whether the customer is looking for a one-time treatment for a specific problem or an ongoing pest management program. If they want ongoing service, the form should capture the preferred service frequency — monthly, bi-monthly, quarterly — and which pests the program should target. If they want a one-time treatment, the form should note that and set the expectation that a single treatment may require one or two follow-up visits depending on the pest and the severity of the infestation. Termite treatments, for example, almost always require annual inspections after the initial treatment regardless of whether the customer considers the problem resolved. The intake form is where that expectation gets documented, not the invoice after the first visit.

Routing the technician to the right treatment plan

Every field on a pest control intake form exists for one reason: to route the technician to the correct treatment plan before they leave the office. The pest identification tells them what they are treating. The property details tell them where to look and what structural conditions are contributing to the problem. The pets-and-children section tells them which products they can and cannot use. The prior treatment history tells them what has already failed and why. The access requirements tell them how to get to the treatment areas. The food handling section tells them whether they are operating under standard protocols or food safety regulations. The service expectation section tells them whether they are setting up a one-time job or the first visit in an ongoing program.

When all of that information is captured at intake, the technician loads the truck with the right products, brings the right equipment, arrives at the right time through the right access point, and starts treating instead of investigating. That is one visit instead of two. That is a customer who sees results on the first service instead of waiting for a follow-up. That is a business that runs profitably because its technicians are executing treatment plans, not conducting free diagnostic visits that should have been handled by the intake process.

Pest control is a trade where the quality of the intake directly determines the quality of the service. A form that captures the right information does not just make the office more organized — it makes the technician more effective, the customer more satisfied, and the business more defensible when a treatment does not go as expected and someone wants to know what was documented before the first chemical was applied. If you are building intake documentation across multiple service trades, the complete form catalog covers pest control alongside dozens of other trade-specific categories, each designed around the operational questions that matter before the first visit.

Pest control intake forms — $12.99 complete set

Fillable PDF intake form + client questionnaire. Pest identification, property details, pets and children, prior treatment history, access requirements, food handling areas, and service expectations. Built for pest control companies.

View Pest Control Forms

Not ready to buy? Download our free Universal Intake Form — a fillable PDF you can use today, no purchase needed.