Intake Forms for Real Estate Appraisals: What the Appraiser Needs Before the Site Visit
An appraiser drives forty-five minutes to a residential property for a refinance appraisal. She arrives, parks, walks the perimeter, and begins her interior inspection. The homeowner mentions that the finished basement — the one with a full bathroom, a kitchenette, and a separate entrance — was completed two years ago. No permit was pulled. The homeowner is cheerful about this, as though it is a charming detail. The appraiser now has a problem. She cannot measure and report the finished space as permitted living area without documentation. She cannot ignore it. She needs to determine whether the municipality even classifies it as habitable square footage, and she needs to research comparable sales that reflect similar unpermitted improvements. None of this was communicated before the visit. The appointment that should have taken ninety minutes now requires a second trip, additional research, and a difficult phone call to the lender explaining the delay.
This is the most expensive mistake in appraisal work, and it is almost entirely preventable. Not with better driving directions. Not with a longer inspection window. With a structured intake form that captures the information the appraiser needs before the car leaves the driveway.
Property identification: getting the basics exactly right
Appraisal is one of the few professions where an incorrect address is not just an inconvenience — it can invalidate the entire report. The intake form must capture the property address in full, including unit or suite number for condominiums and multi-family properties, along with the county, the tax parcel number or assessor’s parcel number, and the legal description as it appears on the deed. It should also capture the current owner’s name, which the appraiser will verify against public records.
This sounds elementary, and it is. But appraisers who rely on a verbal order from a lender’s assistant — “it’s the blue house on Maple, the borrower’s name is Johnson” — are the ones who discover at the property that the parcel number belongs to the lot next door, or that the legal description references an easement that bisects the property in a way that affects value. A written intake that requires the parcel number and legal description forces someone to look those up before the assignment begins, and that simple act of looking things up prevents a surprising number of downstream problems.
Purpose of appraisal: why it changes everything
A property does not have a single value. It has a value for a purpose, and the purpose shapes the entire appraisal approach. A purchase appraisal for a conventional mortgage requires the appraiser to evaluate whether the property supports the purchase price as market value. A refinance appraisal asks a slightly different question: what is the current market value, independent of any transaction? An estate appraisal may require a retrospective valuation as of the date of death, which could be months or even years in the past. A divorce appraisal may need to establish fair market value as of the date of separation or the date of filing, depending on the jurisdiction. A tax appeal appraisal is arguing against the municipality’s assessed value, which means the appraiser needs to understand not just market value but how the assessor arrived at the assessment being challenged.
Each of these purposes changes the comparable sales the appraiser selects, the effective date of the appraisal, the report format, and the intended users. An appraiser who does not know the purpose before arriving at the property is not just unprepared — she is incapable of doing the job correctly. The intake form captures this with a single field, and that single field determines the framework for everything that follows.
What the owner knows that public records do not
Public records will tell the appraiser the lot size, the year built, and the assessed value. They will not tell the appraiser that the owner replaced the roof eighteen months ago, added a three-season porch last summer, or converted the garage into a home office during the pandemic. These improvements affect value, and they need to be documented before the site visit so the appraiser can research comparable properties with similar features.
The intake form should ask the owner to describe any improvements, renovations, or additions completed during their ownership, including approximate dates and costs. It should specifically ask whether permits were obtained for any structural, electrical, or plumbing work — not to judge the homeowner, but because unpermitted work creates a measurable valuation problem. A finished basement with permits is additional living area. A finished basement without permits is a storage area with drywall, and the difference in value can be tens of thousands of dollars. The appraiser needs to know this before she arrives, not while she is standing in the basement with a tape measure and a homeowner who is expecting good news.
Known defects belong on the intake form as well. A cracked foundation, active water intrusion, an aging septic system, aluminum wiring, or environmental contamination all affect the appraisal. When the intake form captures these details in writing before the visit, the appraiser can prepare appropriate adjustments and research how comparable properties with similar conditions have sold. When these details surface during the inspection, they trigger delays, additional research, and sometimes a scope change that requires renegotiating the fee.
Comparable sales the owner wants considered
Homeowners almost always have opinions about comparable sales. The neighbor sold for $485,000 last month, and the owner believes her house is nicer. Or a property two streets over sold for $600,000, and the owner cannot understand why the bank’s previous appraiser valued her home at $520,000. These opinions are not irrelevant. The owner may be aware of recent sales that the appraiser has not yet identified, particularly in neighborhoods where off-market transactions or estate sales occur.
A field on the intake form that invites the owner to list any recent sales she believes are comparable — with addresses, approximate sale prices, and sale dates — gives the appraiser useful market intelligence. The appraiser is not obligated to use these comparables, but she is obligated to consider them if they are relevant. More importantly, when the owner has provided her preferred comparables in writing and the appraiser has addressed them in the report, the owner is far less likely to challenge the appraised value. The intake form creates the conversation before the appraisal, not after the report is delivered.
Access and scheduling: the logistical details that waste hours
An appraiser who arrives at a gated community without the gate code wastes thirty minutes. An appraiser who arrives at a property with an aggressive dog that was not mentioned on the intake call loses the appointment entirely. An appraiser who schedules a two-hour window for a 1,200-square-foot ranch and discovers upon arrival that the property includes a detached guest house, a barn, and twelve acres does not have enough time to complete the inspection.
The intake form should capture access instructions (gate codes, lockbox combinations, alarm codes, parking restrictions), the presence of pets, whether the owner or a representative will be present during the inspection, and the property’s approximate total size including any outbuildings, detached structures, or acreage. These are not administrative details. They are the difference between a productive site visit and a wasted trip that pushes the entire assignment behind schedule.
Intended use, intended users, and USPAP compliance
The Uniform Standards of Professional Appraisal Practice require every appraisal report to state the intended use and identify the intended users. For a mortgage appraisal, the intended use is typically to assist the lender in making a lending decision, and the intended user is the originating lender and any subsequent holders of the mortgage. For a divorce appraisal, the intended use is equitable distribution, and the intended users may include both parties and the court. For a tax appeal, the intended user is the assessment appeals board.
These are not boilerplate lines the appraiser fills in mechanically. They define the scope of the appraiser’s liability. An appraisal report prepared for a lender cannot be repurposed by the borrower for a tax appeal or a divorce proceeding without a new engagement. The intake form establishes this boundary at the beginning of the assignment, in writing, so there is no ambiguity later about who the report was prepared for and what it was prepared to do.
For lender-ordered appraisals, the intake should also capture the lender’s specific requirements: which report form to use (URAR 1004, exterior-only 2055, condo 1073), whether an FHA or VA addendum is required, the loan type and loan amount, and any assignment conditions the lender has specified. An appraiser who discovers at the property that the assignment requires an FHA inspection — with its specific requirements for peeling paint, handrail safety, and attic access — when she was prepared for a conventional appraisal has just inherited an hour of additional work she did not price into her fee.
Scope of work documentation
USPAP’s Scope of Work Rule requires the appraiser to identify the problem to be solved and determine the appropriate scope of work before beginning the assignment. The intake form is where scope of work begins. It documents what type of inspection will be performed (interior and exterior, exterior only, desktop), what approaches to value will be developed (sales comparison, cost, income), and any extraordinary assumptions or hypothetical conditions that apply.
A scope of work that is discussed verbally and documented after the fact is a scope of work that is vulnerable to dispute. A scope of work that is captured on the intake form at the time of engagement is a contemporaneous record of what was agreed. When a client later asks why the cost approach was not developed, or why certain comparables were not used, the intake form provides the answer: because the agreed scope of work did not call for it, and here is the documentation from day one. Appraisers who browse our professional intake form templates consistently tell us that having these fields pre-built saves them from the scope disputes that eat into their margins.
The second trip problem
Every appraiser knows the second trip. It is the drive back to the property because something was missed, something was not communicated, something changed between the order and the inspection. The owner forgot to mention the addition. The lender forgot to mention the FHA requirement. Nobody mentioned the easement. The gate code was wrong. The dog was loose.
The second trip is not just a time cost. It is a fee problem, because most appraisers are working on a flat-fee basis and the second trip was not priced into the engagement. It is a credibility problem, because the lender or the borrower sees the delay and wonders whether the appraiser is disorganized. It is a scheduling problem, because the second trip displaces another assignment. And in competitive markets with tight closing timelines, it is sometimes a deal-killing problem, because the appraisal delay pushes past the rate-lock expiration or the contract deadline.
The intake form is the cure for the second trip. Every field on the form represents a question that, if left unasked, becomes a reason to drive back. Property identification prevents wrong-address visits. Purpose of appraisal prevents wrong-format reports. Owner-reported improvements prevent surprise square footage. Access details prevent locked-gate delays. Scope of work documentation prevents fee disputes. The intake form does not make the appraiser better at appraising — it makes the appraiser better at never showing up unprepared.
The appraisers who have eliminated the second trip from their practice are not the ones with the best local knowledge or the fastest measuring tools. They are the ones with a structured intake process that captures everything before the car leaves the driveway. The site visit becomes confirmation of what they already know, not a discovery session for what they should have been told.
Related reading:
Intake Forms for Real Estate Agents: What to Capture From Buyers and Sellers Before the First Showing · The Real Cost of Bad Client Intake · Intake Forms for High-Ticket Services: Qualifying Clients Before the Consultation